Product Name Feiyu Video Rig for Smartphone
Battery Capacity 1300mAh, built-in battery cannot be removed, charge it via side USB-C port, support all the normal charger and quick charger which charging power≤18W.
Operating Voltage 6.8V–8.4V
Theoretical Battery Life About 40min
Charging Time About 1.5h
Materials In Main Body Aluminum alloy
Weight About 490g/1.08 lb
Water-Proof Grade Not Water-proof
Dimensions About 310*149*50mm
Dimensions
Compatible Cameras/Smartphones Supports smartphones 52~88mm wide and under 9.5mm thick.
Smartphone Holder Type Heat-Dissipating Phone Holder
External Recording Supports direct recording to external storage from iPhone 15 Pro / iPhone 15 Pro Max / iPhone 16 Pro / iPhone 16 Pro Max/ iPhone17 Pro / iPhone17 Pro Max (ProRes recording).
Memory card / External Drive When using a memory card or external drive for external recording, the storage must meet the following requirements:
(1) Recommended minimum sustained write speeds:
1080p @ 30 fps: ≥ 30 MB/s
1080p @ 60 fps: ≥ 80 MB/s
4K @ 30 fps: ≥ 130 MB/s
4K @ 60 fps: ≥ 300 MB/s
(Actual performance may vary depending on scene complexity.)

(2) Memory card / external drive must be formatted as APFS or exFAT.
Do not enable password protection.
Extended Ports Both side of heat-dissipating phone holder:
Cold shoe*1, which can mount third party accessories;
1/4 inch thread hole*1, which can mount third party accessories;

Above the cage: high-speed HUB cable*1, for connecting a smartphone;
Left and right sides of the cage:
USB-C extension port*2 for connecting microphones, external drives, and other accessories;
USB-C charging port*1;
Storage card slot*1;
1/4 inch thread hole*2, for mounting the handle;
Cage base:
1/4 inch thread hole*1, which can mount tripod;
Arca-Swiss interface*1, for mounting on the gimbal or third-party accessories;
Above the handle: 1/4 inch thread hole*2, which can mount third party accessories;
Below the handle: 1/4 inch thread hole*2, which can mount third party accessories;
Front and rear sides of the handle: 1/4 inch thread hole*4, which can mount third party accessories;
Standard Accessories Feiyu Video Rig for Smartphone*1
Handle*2
Tripod*1
USB-A to USB-C Charging Cable*1